Port Color Legend

Port Color Legend

All Uplevel Hardware is outfitted with 1Gbps Auto-Negotiating Ports. When a connection is negotiated there are three (3x) negotiation possibilities.

1000BASE-T 
(1Gbps) 
Color Green in the Portal
100BASE-T 
(100Mbps)
Color Blue in the Portal
10BASE-T
(10Mbps)
Color Yellow in the Portal

If you connect two 1Gbps devices but the Port color is not Green, this means that one of the twisted pairs in the Ethernet Cable has degraded and needs to be replaced. This can also mean that your Ethernet cable is CAT5, not CAT5-E (minimum spec for 1Gbps).  


    • Related Articles

    • Security Groups - InterVLAN Routing

      Summary Your Uplevel Gateway's firewall implements firewall rules that govern traffic flow between security groups (VLANs / subnets) on the LAN. Devices in Guest are completely isolated and can only reach the Internet Devices in Boss can reach all ...
    • Throughput speeds of UG-101 Gateway

      WAN Throuput Because of the Cavium Octeon III network processor used in the Gateway, the internal routing / VLAN-firewalling performance is of course quite high -3-4 gigabits/second. With all sophisticated Firewall functions enabled (Country ...
    • Connecting Uplevel Switches using SFP Ports

      Tested SFP Modules: TP-LINK Gigabit SFP module, 1000Base-SX Multi-mode Fiber Mini GBIC Module, Plug and Play, LC/UPC interface, Up to 550/220m distance (TL-SM311LM) Connecting and Chaining Switches "SFP1", "Uplink SFP" should be connected to an ...
    • Uplevel SNMP - OIDs

      General System ============== System Description .1.3.6.1.2.1.1.1.0 = STRING: Uplevel Systems UG-101 Gateway System Uptime .1.3.6.1.2.1.1.3.0 = Timeticks: (193583855) 22 days, 9:43:58.55 System Name .1.3.6.1.2.1.1.5.0 = STRING: gateway System Date ...
    • Setting Static IPs on the WAN Ports

      From the Uplevel Portal (Firmware Version 4.4+) Login to your Portal and navigate to the Overview section for the Site you would like to configure Click Set WAN Static IP Select Static IP from the drop down menu Enter the IP Address, Gateway Address, ...