Uplevel SNMP - OIDs

Uplevel SNMP - OIDs

General System
==============

System Description
.1.3.6.1.2.1.1.1.0 = STRING: Uplevel Systems UG-101 Gateway

System Uptime
.1.3.6.1.2.1.1.3.0 = Timeticks: (193583855) 22 days, 9:43:58.55

System Name
.1.3.6.1.2.1.1.5.0 = STRING: gateway

System Date
.1.3.6.1.2.1.25.1.2.0 = STRING: 2021-3-2,1:3:15.0,+0:0

Ethernet Interfaces
===================

Internet Port
-------------
Name
.1.3.6.1.2.1.2.2.1.2.4 = STRING: eth0
Operational Status
.1.3.6.1.2.1.2.2.1.7.4 = INTEGER: up(1)
RX bytes
.1.3.6.1.2.1.2.2.1.10.4 = Counter32: 1943355898
TX bytes
.1.3.6.1.2.1.2.2.1.16.4 = Counter32: 2152561988

Aux Internet Port
-----------------
Name
.1.3.6.1.2.1.2.2.1.2.20 = STRING: agl0
Operational Status
.1.3.6.1.2.1.2.2.1.7.20 = INTEGER: down(2)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.20 = Counter32: 0
TX Bytes
.1.3.6.1.2.1.2.2.1.16.20 = Counter32: 0

Port #2
-------
Name
.1.3.6.1.2.1.2.2.1.2.5 = STRING: eth1
Operational Status
.1.3.6.1.2.1.2.2.1.7.5 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.5 = Counter32: 743343375
TX Bytes
.1.3.6.1.2.1.2.2.1.16.5 = Counter32: 763463440

Port #3
-------
Name
.1.3.6.1.2.1.2.2.1.2.6 = STRING: eth2
Operational Status
.1.3.6.1.2.1.2.2.1.7.6 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.6 = Counter32: 1786362346
TX Bytes
.1.3.6.1.2.1.2.2.1.16.6 = Counter32: 1388445848

Port #4
-------
Name
.1.3.6.1.2.1.2.2.1.2.7 = STRING: eth3
Operational Status
.1.3.6.1.2.1.2.2.1.7.7 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.7 = Counter32: 2656786445
TX Bytes
.1.3.6.1.2.1.2.2.1.16.7 = Counter32: 2078100564

Port #5
-------
Name
.1.3.6.1.2.1.2.2.1.2.8 = STRING: eth4
Operational Status
.1.3.6.1.2.1.2.2.1.7.8 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.8 = Counter32: 511588947
TX Bytes
.1.3.6.1.2.1.2.2.1.16.8 = Counter32: 2109605961

Port #6
-------
Name
.1.3.6.1.2.1.2.2.1.2.9 = STRING: eth5
Operational Status
.1.3.6.1.2.1.2.2.1.7.9 = INTEGER: down(2)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.9 = Counter32: 3419841
TX Bytes
.1.3.6.1.2.1.2.2.1.16.9 = Counter32: 208609059

Port #7
-------
Name
.1.3.6.1.2.1.2.2.1.2.10 = STRING: eth6
Operational Status
.1.3.6.1.2.1.2.2.1.7.10 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.10 = Counter32: 1533674178
TX Bytes
.1.3.6.1.2.1.2.2.1.16.10 = Counter32: 1562208557

Port #8
-------
Name
.1.3.6.1.2.1.2.2.1.2.11 = STRING: eth7
Operational Status
.1.3.6.1.2.1.2.2.1.7.11 = INTEGER: up(1)
RX Bytes
.1.3.6.1.2.1.2.2.1.10.11 = Counter32: 3410460379
TX Bytes
.1.3.6.1.2.1.2.2.1.16.11 = Counter32: 1349003180

Layer 2 Bridges
===============

Layer 2 Forwarding Table (ARP Table)
.1.3.6.1.2.1.3.1

Routing Tables
==============

IP Address Table
.1.3.6.1.2.1.4.20

IP Routing Table
.1.3.6.1.2.1.4.21

TCP Connection Table
.1.3.6.1.2.1.6.13

Memory Usage
============

Physical Memory Size
.1.3.6.1.2.1.25.2.3.1.5.1 = INTEGER: 4020140
Physical Memory Used
.1.3.6.1.2.1.25.2.3.1.6.1 = INTEGER: 847744
Virtual Memory Size
.1.3.6.1.2.1.25.2.3.1.5.3 = INTEGER: 4020140
Virtual Memory Used
.1.3.6.1.2.1.25.2.3.1.6.3 = INTEGER: 847744
Memory Buffers Size
.1.3.6.1.2.1.25.2.3.1.5.6 = INTEGER: 4020140
Memory Buffers Used
.1.3.6.1.2.1.25.2.3.1.6.6 = INTEGER: 148
Cached Memory Size
.1.3.6.1.2.1.25.2.3.1.5.7 = INTEGER: 473520
Cached Memory Used
.1.3.6.1.2.1.25.2.3.1.6.7 = INTEGER: 473520

Processor Utilization
=====================

CPU #1 Load Percent
.1.3.6.1.2.1.25.3.3.1.2.768 = INTEGER: 69
CPU #2 Load Percent
.1.3.6.1.2.1.25.3.3.1.2.769 = INTEGER: 65
CPU #3 Load Percent
.1.3.6.1.2.1.25.3.3.1.2.770 = INTEGER: 74
CPU #4 Load Percent
.1.3.6.1.2.1.25.3.3.1.2.771 = INTEGER: 65


    • Related Articles

    • Site to Site VPN (Uplevel to Uplevel)

      Introduction Configuring site-to-site VPNs between Uplevel Gateways is done with a single click. In addition, routing, switching, firewalling, VLANs are all configured automatically to ensure security with maximum convenience. Configuration From your ...
    • Azure vs. Uplevel Active Directory

      Portions of this article are from the Blog post on our website - https://www.uplevelsystems.com/blog/uplevel-ad-vs-azure-ad-whats-the-difference Introduction On-premises Microsoft Active Directory, Uplevel Active Directory compatible Directory ...
    • Uplevel Systems Storage Backup Services

      Enabling Backup in the Portal Login to your Portal and choose Storage Edit each Share Choose Backup to set your back up preferences Save all the way out. Local Snapshots: (needs to be enabled in the Backup section, no extra fees) Uplevel's Storage ...
    • Connecting Uplevel Switches using SFP Ports

      Tested SFP Modules: TP-LINK Gigabit SFP module, 1000Base-SX Multi-mode Fiber Mini GBIC Module, Plug and Play, LC/UPC interface, Up to 550/220m distance (TL-SM311LM) Connecting and Chaining Switches "SFP1", "Uplink SFP" should be connected to an ...
    • Site-to-Site VPN - Non-Uplevel (3rd Party VPN)

      Introduction You can quickly set up IPsec tunnels to connect to third-party firewalls and cloud services. We currently have 'pre-configured' configurations for Microsoft Azure, Amazon AWS, etc. to remove the complexity from connecting to those ...